Pair a Yealink Handset with a DECT Base Station

Applies To

• Yealink W70B Base Station
• Yealink W76P Base Station and Handset
• Yealink W59R Handset
• Yealink W56H Handset
• Yealink W78H Handset

Procedure

Before registering a handset, the base station will need to be placed in Registration mode.

Enabling Registration Mode on the W70B Base Station

Long press the pairing button on the base station (for approximately 3 seconds) until the top green LED handset indicator light flashes.

The base station will now be in Registration mode.

Note: If the base station does not identify a DECT phone within 90 seconds, the registration mode will switch off automatically.

Registering a New Handset to a Base Station

1. Press the Reg soft key or go to Menu > Settings > Registration > Register Handset to register the handset. The handset will now search for a base station in the registration mode.
2. After the handset is registered successfully, the phone prompts Handset Subscribed and Base NO (the last 4 characters of the connected Base’s MAC address).
3. After the handset is initialized successfully, an icon with the internal handset number and handset name appears on the phone screen.

Note: You need to enter the base PIN (default: 0000) after a base is found.